GO-TECH Banner Skip Navigation Links
~ Home
~ Production DataExpand ~  Production Data
~ Well DataExpand ~  Well Data
~ NM Pricesheet
~ Water DataExpand ~  Water Data
~ ProjectsExpand ~  Projects
~ SoftwareExpand ~  Software
~ ArchiveExpand ~  Archive
~ Other LinksExpand ~  Other Links
~ HelpExpand ~  Help
North American Oil and Gas News
 7+1 Reasons Why the U.S. Will Be an LNG Hot Spot in the Next Years
 Half of cost reductions in offshore developments attributed to downsizing, simplification and design
 Whiting Petroleum announces third quarter 2016 results
 National Oilwell Varco reports third quarter 2016 results
Source: Oil Voice

NYMEX LS Crude 49.24
Navajo WTXI 0
Henry Hub 2.733
Updated : 10/26/2016
State Land Office Data Access

OCD well/log image files
PRRC     NM-TECH     NM-BGMR    
Skip Navigation Links
Skip Navigation Links.

Corrosion in Oil Field Equipment

Corrosion can cause problems oilfield equipment and facilities. The following pages discuss corrosion in an equipment specific format. The main areas covered are artificial lift wells, casing and tubing, surface equipment, and enhanced oil recovery operations. From these pages, you can link to descriptions of the specific types of corrosion found. This is not a complete list of equipment subject to corrosion, but it hits on some of the areas where corrosion is a major concern. For a more comprehensive look at corrosion in the oilfield, refer to the references page.

Petroleum Recovery Research Center, Socorro, NM-87801